If you’re a wise car owner, you must know that changing your auto battery is a basic and simple car repair that you can actually finish by yourself with the right tools and skills. That’s right. If you think that you can do it on your own, then try to do some DIY battery fitting job.
While the vast majority understand that they require a battery when their auto fails to start, it is critical to know about the condition of your battery before this happens so you can replace it before you get stranded on the roadside. Now that you are planning to buy a car battery online at Roadside Response website, make sure that you check out these 5 battery fitting tips.
1. Set everything in place.
First things first. Prepare all the materials needed. This includes safety glasses, gloves, ratchet with extension, almost boiling water and sockets. After preparing all the necessary materials, be sure that the car is in a safe place. Keep it far from smoking or some other circumstance that may bring about an electrical current to start and cause a fire.
2. Consider safety when getting started.
The next thing you need to so is to observe safety when turning the parking brake on and turning off the car. Also, check to if route and radio codes apply – Prior to disengaging your battery, check whether your auto requires any radio or route codes to be credited once the new battery is introduced. These codes can be found in your proprietor’s manual, or acquired from your auto’s dealership. In the event that your vehicle needs these codes, and you don’t have a memory saver to introduce in the cigarette lighter, then record the codes. This will guarantee your radio and route fill in as they did before the battery was expelled.
3. Check the battery’s age.
Checking the age of your car battery is very important in order for you to identify whether or not it’s high time to replace it. Keep in mind that most batteries should be changed out each 3-5 years. Hence if your battery age falls in that age section, it might be the ideal opportunity for another battery.
4. Remove the battery safely from the car.
Removing the battery is a physical action and is the most troublesome part of the change. Painstakingly and safely lift and expel the battery from your auto. Make sure to utilize right posture, as despite the fact that the battery is little, it is substantial and as a rule weighs around 40 pounds.
5. Mount the new battery.
Now the time has come to install your new battery. Utilizing the right posture, safely place the battery into the holder. Using the right estimated attachment and ratchet, re-introduce the Battery Hold Down to guarantee the battery is well secured to the car. Take the positive terminal and place it on the battery post, ensuring it is secured the distance toward the base of the post. This will maintain a strategic distance from possible corrosion. Once you have snugged down the battery terminal onto post with ratchet, you can do the same with the negative terminal. When mounting the new car battery, make sure that it to maintain a strategic distance from electrical wirings.
Just follow these 5 tips in fitting a new car battery and nothing will likely go wrong! Buy the best value car battery prices in Wollongong and fit your new car battery safely. In case you don’t have the knowhow, then ask for help from a trusted roadside assistance company.